Thread: Could use some help connecting
-
March 15th, 2019, 00:06 #11
So in the past you had to set port forwarding? Because all you should have needed to do was change the computer that the rule was pointing to. If you didn’t need to port forward before then assuming nothing has changed you shouldn’t have to now. It may be all you needed to do was reboot your router. If FG cnnected fine before then either the network has been set to public, your anti virus has had some change of heart or your computer’s IP address has changed and your Port Forwarding rule needs updated.
If you didn’t need to port forward before I wouldn’t mess with that now.If there is something that you would like to see in Fantasy Grounds that isn't currently part of the software or if there is something you think would improve a ruleset then add your idea here https://www.fantasygrounds.com/featu...rerequests.php
-
March 15th, 2019, 01:21 #12
- Join Date
- Jan 2018
- Posts
- 45
I did have it pit forwarded before also.i have now u I stalled all antivirus software so it isnt that. My network is still on private. Just confirmed
-
March 15th, 2019, 01:32 #13
Verify your internal IPv4 address. You rule has is set to 10.0.0.60 but I don't think your ping showed the same did it? I believe the command is netstat
Problems? See; How to Report Issues, Bugs & Problems
On Licensing & Distributing Community Content
Community Contributions: Gemstones, 5E Quick Ref Decal, Adventure Module Creation, Dungeon Trinkets, Balance Disturbed, Dungeon Room Descriptions
Note, I am not a SmiteWorks employee or representative, I'm just a user like you.
-
March 15th, 2019, 02:27 #14
- Join Date
- Jan 2018
- Posts
- 45
Within fantasy grounds it says 10.0.0.60. Netstat says the same
-
March 15th, 2019, 03:41 #15
Sounds like you have done everything right...
Sometimes people have reported that they have to do a few things, if you haven't, try these and test after each one:
- reboot your router
- delete your port forwarding rule and recreate it
- delete any firewall and/or anti-virus exceptions and recreate them
There are a couple of network gurus who can give better info than me and may even be able to walk through things one at a time with you. Hopefully one will stop by soon and point out what we are missing.
Problems? See; How to Report Issues, Bugs & Problems
On Licensing & Distributing Community Content
Community Contributions: Gemstones, 5E Quick Ref Decal, Adventure Module Creation, Dungeon Trinkets, Balance Disturbed, Dungeon Room Descriptions
Note, I am not a SmiteWorks employee or representative, I'm just a user like you.
-
March 15th, 2019, 04:18 #16
- Join Date
- Jan 2018
- Posts
- 45
Fixed
Not really sure what the underlying issue was but i did what you said. Deleted the port forwarding rule. Unplugged my Router, and turned off my firewall for private networks connections. Seems to work fine now, thank you all for the help so much
-
March 15th, 2019, 05:18 #17
Problems? See; How to Report Issues, Bugs & Problems
On Licensing & Distributing Community Content
Community Contributions: Gemstones, 5E Quick Ref Decal, Adventure Module Creation, Dungeon Trinkets, Balance Disturbed, Dungeon Room Descriptions
Note, I am not a SmiteWorks employee or representative, I'm just a user like you.
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks