Refer a Friend
Page 4 of 8 First ... 2 3 4 5 6 ... Last
  1. #31
    Quote Originally Posted by TheoGeek View Post
    I just posted an update to Theogeek's Improved Critical to the test channel. I disabled everything but 5e for now. Test away.

    The version should show up in the chat as "9.TEST_CHANNEL"
    Gimme 5 mins to stock up some tea and I'll update xD

    edit: Started now. Let's see. Do you have any features to be tested in mind? Otherwise, I just finished 2 Crit Builds as prep and I can crit 27% of the time.
    Last edited by Tempered7; March 20th, 2026 at 22:49.
    I scribble Solo RPG methods and reviews for Resources in my All Things Solo blog.
    Now with Solo Builds for DnD 5E. And All Solo Modules for FGU WIP.
    LIST OF ALL FREE FGU STUFF
    //Design with Systems, not Custom Solutions!

  2. #32
    @TheoGeek

    Started now. Let's see. Do you have any features in mind to be tested? Otherwise, I just finished 2 Crit Builds as prep and I can crit 27% of the time.

    EDIT:

    20260321005224_1.jpg
    Above pic is my settings for Crits.
    Last edited by Tempered7; March 20th, 2026 at 22:53.
    I scribble Solo RPG methods and reviews for Resources in my All Things Solo blog.
    Now with Solo Builds for DnD 5E. And All Solo Modules for FGU WIP.
    LIST OF ALL FREE FGU STUFF
    //Design with Systems, not Custom Solutions!

  3. #33
    @Tempered

    Nothing in particular. I did a rudimentary check and it looked good, but I didn't really stress test it. If you want to try to make it do bad things, be my guest!

  4. #34
    Quote Originally Posted by TheoGeek View Post
    @Tempered

    Nothing in particular. I did a rudimentary check and it looked good, but I didn't really stress test it. If you want to try to make it do bad things, be my guest!
    Oh ok. Then I'll just stress test on a 9 AC Camel,
    1- First Crit Hit results
    2- Then Crit Damage results to see if they match with the settings.
    3- NVM: Will also test on crit immune npcs like the undead / construct to see what happens. [They can unlist 3.5 ed out of shelves, but they cant unlist 3.5 ed out of hearts :')]
    4- Then finish with a high AC monster like a helmed horror.
    Last edited by Tempered7; March 21st, 2026 at 00:44.
    I scribble Solo RPG methods and reviews for Resources in my All Things Solo blog.
    Now with Solo Builds for DnD 5E. And All Solo Modules for FGU WIP.
    LIST OF ALL FREE FGU STUFF
    //Design with Systems, not Custom Solutions!

  5. #35
    Quote Originally Posted by Tempered7 View Post
    Oh ok. Then I'll just stress test on a 9 AC Camel,
    1- First Crit Hit results
    2- Then Crit Damage results to see if they match with the settings.
    3- Will also test on crit immune npcs like the undead / construct to see what happens.
    4- Then finish with a high AC monster like a helmed horror.
    That sounds great!

  6. #36
    Ok, here's my findings: First I rolled tons of attacks with ADV to see what crits. Nothing unusual there. [edit: nvm --Btw, undeads are not immune to crit in 2014? It doesnt say in their stats :S]

    I Hit the first error: It happened right after I attacked the Zombie alone. I rolled Nat20 with a Vorpal Scimitar. Rolling damage also gave the same error later on.
    theo-imp-crit-error.png

    This is the chatlog analyzer link [also in attachment] but it doesnt tell much cause my crit profile is high: https://fgu.kuura.art/chatlog/69bdc7...haracter/CRIT!

    Crit elf build xml is in the attachment: Basically, Barb2/Champ5/Assassin13 with Elven Accu + Dual Wield + Martial Adept. All buffs on.
    Attached Files Attached Files
    Last edited by Tempered7; March 21st, 2026 at 00:44.
    I scribble Solo RPG methods and reviews for Resources in my All Things Solo blog.
    Now with Solo Builds for DnD 5E. And All Solo Modules for FGU WIP.
    LIST OF ALL FREE FGU STUFF
    //Design with Systems, not Custom Solutions!

  7. #37
    Ugh. Do you have the Nat20 extension loaded? If so, could you try it without?

  8. #38
    I didnt load Nat20 or the other one. Only Improved Crit. Fresh TEST campaign.

    EDIT: Now trying the same thing with other weapons.

    EDIT 2: Same thing with a Whip and Longsword +2. It happens when I roll Nat20 but after a dropped roll or two.
    Last edited by Tempered7; March 21st, 2026 at 02:51.
    I scribble Solo RPG methods and reviews for Resources in my All Things Solo blog.
    Now with Solo Builds for DnD 5E. And All Solo Modules for FGU WIP.
    LIST OF ALL FREE FGU STUFF
    //Design with Systems, not Custom Solutions!

  9. #39
    Quote Originally Posted by Tempered7 View Post
    It happens when I roll Nat20 but after a dropped roll or two.
    I found the cause of the error: Damage Crit Dice: Maximize under Imp Crit: PC Damage settings. First pic on my OP: https://www.fantasygrounds.com/forum...8&d=1774043602
    I changed it to default:

    20260321014131_1.jpg

    Now it doesnt give the error with the same Scimitar despite Nat20 on double dropped die:

    20260321014522_1.jpg
    Last edited by Tempered7; March 21st, 2026 at 02:52.
    I scribble Solo RPG methods and reviews for Resources in my All Things Solo blog.
    Now with Solo Builds for DnD 5E. And All Solo Modules for FGU WIP.
    LIST OF ALL FREE FGU STUFF
    //Design with Systems, not Custom Solutions!

  10. #40
    Two Corrections:

    Code:
    <extension name="EnlargeReduce"/> CORRECTION: Another go, this time isolated. It still prevents selfFX even when isolated.
    <extension name="Pets"/> CORRECTION: Works [Both + button and drag & drop --I forgot to unlock the sheet before]. Still cant do Petception [Give PC a pet, give the PC to the pet as pet... But you can give the pet another pet. No errors. Didnt add more than that.]
    EDIT: Currently Working on

    From Vaall's Docs: Arcane Ward part of Arcane ward ext is not working.
    Last edited by Tempered7; March 21st, 2026 at 21:36.
    I scribble Solo RPG methods and reviews for Resources in my All Things Solo blog.
    Now with Solo Builds for DnD 5E. And All Solo Modules for FGU WIP.
    LIST OF ALL FREE FGU STUFF
    //Design with Systems, not Custom Solutions!

Page 4 of 8 First ... 2 3 4 5 6 ... Last

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
DICE PACKS BUNDLE

Log in

Log in