Map Subtraction not working on an older map

[Talon 46]

I tried to edit a map I made a couple of months ago but could not use the subtraction mode on a layer above my base layer. I used this technique when I first made the map.

I made a test map and subtract worked when I first made it. Now that map behaves like my other map.

I have a video and attached my program log file.

https://youtu.be/paANN3ZeSEM

[pindercarl]

I tried to edit a map I made a couple of months ago but could not use the subtraction mode on a layer above my base layer. I used this technique when I first made the map.

I made a test map and subtract worked when I first made it. Now that map behaves like my other map.

I have a video and attached my program log file.

https://youtu.be/paANN3ZeSEM

Can you provide a copy of the campaign?

[Talon 46]

I hope this is the correct file. Let me know.

[pindercarl]

I hope this is the correct file. Let me know.

Sorry. I meant a copy of the whole campaign. https://fantasygroundsunity.atlassia...ort+Developers

[Talon 46]

File too large.

My images I assume.

[Talon 46]

I attached a zipped copy without images.

[pindercarl]

I attached a zipped copy without images.

Can you post a copy temporarily on a Google drive or Dropbox? It will be challenging to reproduce the issue without the images.

[Talon 46]

Link to the shared folder. The file is within. Thank you for taking the time to do this.

https://drive.google.com/drive/folde...M0?usp=sharing

[pindercarl]

Link to the shared folder. The file is within. Thank you for taking the time to do this.

https://drive.google.com/drive/folde...M0?usp=sharing

Thanks. Got it.

[pindercarl]

Link to the shared folder. The file is within. Thank you for taking the time to do this.

https://drive.google.com/drive/folde...M0?usp=sharing

I haven't been able to reproduce this yet. The image in question is from a module I don't have, so I have to go track that down.

Since you mentioned that this is an older map, I can suggest something to try: in the paint tool, chose the Edit sub-mode and select a point on the problem shape. Press "Reverse Selected Strokes."

PaintTool.jpg