Page 28 of 28 First ... 18262728
  1. #271
    damned's Avatar
    Join Date
    Mar 2011
    Location
    Australia
    Posts
    19,528
    Blog Entries
    1
    post a screenshot of the portforward rule and av/firewall rules please
    im assuming you are getting a connection test fail?

    MoreCore - Generic Ruleset
    --- Projects ---
    Extensions | Tutorials | MoreCore | MoreCore Themes | Call of Cthulhu | Maelstrom | FG Con

  2. #272
    Yes, I have a connection test failed message, but yesterday it worked fine after setting everything up multiple times.

    Virtual Server: https://puu.sh/Fbuia/8a3cbbc70c.png
    Port Trigger: https://puu.sh/Fbuij/a9ae220b2a.png
    AV Rule: https://puu.sh/Fbuiq/e07850987c.png

  3. #273
    damned's Avatar
    Join Date
    Mar 2011
    Location
    Australia
    Posts
    19,528
    Blog Entries
    1
    Remove the Port Trigger - its not required.
    For the AV rule - you might adjust it down to
    tcp and inbound udp and both is not required

    However - it was working and now is not...
    Have a look at the Xfinity/Comcast post and see if your provider has also done something like that.
    Try power cycling your router

    Im going to be offline for a bit but will pick this up again later if still unresolved.

    MoreCore - Generic Ruleset
    --- Projects ---
    Extensions | Tutorials | MoreCore | MoreCore Themes | Call of Cthulhu | Maelstrom | FG Con

  4. #274
    I can't see anything suggesting sparklight/cableone has a similar security setting, and I have power cycled my router and my PC but with no results. When I downgraded my AV rule it worked for a single test, but all tests after are showing failed again.

  5. #275
    damned's Avatar
    Join Date
    Mar 2011
    Location
    Australia
    Posts
    19,528
    Blog Entries
    1
    Quote Originally Posted by BearOnATricycle View Post
    I can't see anything suggesting sparklight/cableone has a similar security setting, and I have power cycled my router and my PC but with no results. When I downgraded my AV rule it worked for a single test, but all tests after are showing failed again.
    Please call your ISP as it does sound like the connection test is triggering a firewall rule. It could be a TCP flood protection rule but more likely intrusion detection

    MoreCore - Generic Ruleset
    --- Projects ---
    Extensions | Tutorials | MoreCore | MoreCore Themes | Call of Cthulhu | Maelstrom | FG Con

Thread Information

Users Browsing this Thread

There are currently 2 users browsing this thread. (1 members and 1 guests)

  1. hicksms

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Log in

Log in