MoreCore Ruleset

Good start kevdog45,

First - read that link that Trenloe pointed you to. You *could* just update that one file but you would need to do it every time there is an update. It will be better to make a copy of that script, call your slashcommand barebones and make a new one.

For the code...
You have some more questions to ask...
Are modifiers used?
Are they applied before or after you check for doubles?
What other things affect this dice roll?

Hello damned

Script aventure modifying :

--
-- Please see the license.html file included with this distribution for
-- attribution and copyright information.
--

local sCmd = "ave";

-- MoreCore v0.60
function onInit()
CustomDiceManager.add_roll_type(sCmd, performAction, onLanded, true, "all");
end

function performAction(draginfo, rActor, sParams)
Debug.console("performAction: ", draginfo, rActor, sParams);
if not sParams or sParams == "" then
sParams = "1d100x50";
end

if sParams == "?" or string.lower(sParams) == "help" then
createHelpMessage();
else
local rRoll = createRoll(sParams);
ActionsManager.performAction(draginfo, rActor, rRoll);
end

end


function onLanded(rSource, rTarget, rRoll)
Debug.console("onLanded: ", rSource, rTarget, rRoll);
local rMessage = ActionsManager.createActionMessage(rSource, rRoll);
rRoll = getDiceResults(rRoll);
rMessage = createChatMessage(rSource, rRoll);
rMessage.type = "dice";
Comm.deliverChatMessage(rMessage);
end


---
--- This function creates the roll object based on the parameters sent in
---
function createRoll(sParams)
local rRoll = {};
rRoll.sType = sCmd;
rRoll.nMod = 0;
--- rRoll.sUser = User.getUsername();
rRoll.aDice = {};
rRoll.aDropped = {};

local nStart, nEnd, sDicePattern, sDescriptionParam = string.find(sParams, "([^%s]+)%s*(.*)");
rRoll.sDesc = sDescriptionParam;
Debug.console("rRoll.sDesc: ", rRoll.sDesc);



-- Now we check that we have a properly formatted parameter, or we set the sDesc for the roll with a message.
Debug.console("Preflightcheck: ", rRoll.sDesc);
if not sDicePattern:match("(%d+)d([%dF]*)x(%d+)") then
rRoll.sDesc = "Parameters not in correct format. Should be in the format of \"#d#x#\" ";
return rRoll;
end

local sDice, sSave = sDicePattern:match("(%d+d[%dF]+)x(%d+)");

local save = tonumber(sSave);
Debug.console("sDicePattern: ", sDicePattern);
Debug.console("save 1st timer: ", save);

Debug.console("sDice: ", sDice);
local aDice, nMod = StringManager.convertStringToDice(sDice);

local aRulesetDice = Interface.getDice();
local aFinalDice = {};
local aNonStandardResults = {};
for k,v in ipairs(aDice) do
if StringManager.contains(aRulesetDice, v) then
table.insert(aFinalDice, v);
elseif v:sub(1,1) == "-" and StringManager.contains(aRulesetDice, v:sub(2)) then
table.insert(aFinalDice, v);
else
local sSign, sDieSides = v:match("^([%-%+]?)[dD]([%dF]+)");
if sDieSides then
local nResult;
if sDieSides == "F" then
local nRandom = math.random(3);
if nRandom == 1 then
nResult = -1;
elseif nRandom == 3 then
nResult = 1;
end
else
local nDieSides = tonumber(sDieSides) or 0;
nResult = math.random(nDieSides);
end

if sSign == "-" then
nResult = 0 - nResult;
end

nMod = nMod + nResult;
table.insert(aNonStandardResults, string.format(" [%s=%d]", v, nResult));
end
end
end


if sDesc ~= "" then
Debug.console("sDesc: ", sDesc);
sDesc = rRoll.sDesc;
Debug.console("rRoll.sDesc: ", rRoll.sDesc);
else
sDesc = sDice;
end
if #aNonStandardResults > 0 then
sDesc = sDesc .. table.concat(aNonStandardResults, "");
end

local rRoll = { sType = sCmd, sDesc = sDesc, aDice = aFinalDice, nMod = nMod, nSave = tonumber(save) };
Debug.console("performAction: ", draginfo, rActor, rRoll);

ActionsManager.performAction(draginfo, rActor, rRoll);

end

---
--- This function first sorts the dice rolls in ascending order, then it splits
--- the dice results into kept and dropped dice, and stores them as rRoll.aDice
--- and rRoll.aDropped.
---
function getDiceResults(rRoll)
nTotal = 0;

local save = tonumber(rRoll.nSave);
Debug.console("Save (dropresults): ", save);


for _,v in ipairs(rRoll.aDice) do
nTotal = nTotal + v.result;
Debug.console("rRoll.nMod 1: ", rRoll.nMod);
end
---nTotal = nTotal + rRoll.nMod;
---rRoll.nMod = - rRoll.nMod;
save = save + rRoll.nMod;

Debug.console("rRoll.aOp: ", rRoll.aOp);

Debug.console("rRoll.nMod 1a: ", rRoll.nMod);

Debug.console("sSaveResult: ", sSaveResult);

if nTotal > save then
Debug.console("Failed: ", nTotal);
if nTotal > 95 then
sSaveResult = "Echec Critique";
elseif nTotal then
sSaveResult = "Echec";
end
elseif nTotal <= save then
Debug.console("Success: ", nTotal);
if nTotal < 06 then
sSaveResult = "Succès Critique";
elseif nTotal then
sSaveResult = "Succès";
end
end

Debug.console("sSaveResult: ", sSaveResult);

rRoll.aTotal = nTotal;
rRoll.aSave = save;
rRoll.aSaveResult = sSaveResult;
return rRoll;
end
---
--- This function creates a chat message that displays the results.
---
function createChatMessage(rSource, rRoll)
local rMessage = ActionsManager.createActionMessage(rSource, rRoll);


---rMessage.text = rMessage.text .. "\n[target] " .. rRoll.aSave .. "\n[modified by] " .. rRoll.sDesc .. " " .. rRoll.nMod .."]\n[" .. rRoll.aSaveResult .. "] " .. rRoll.aTotal;
rMessage.text = rMessage.text .. "\n[" .. rRoll.aSaveResult .. "] " .. rRoll.aTotal;
rMessage.dicedisplay = 0; -- don't display total

rMessage.text = rMessage.text;

return rMessage;
end

---
--- This function creates the help text message for output.
---
function createHelpMessage()
local rMessage = ChatManager.createBaseMessage(nil, nil);
rMessage.text = rMessage.text .. "The \"/"..sCmd.."\" command is used to roll a set of dice, comparing the result against a target number.\n";
rMessage.text = rMessage.text .. "You can specify the number of dice to roll, the type of dice, and the number to be rolled against ";
rMessage.text = rMessage.text .. "by supplying the \"/rolld\" command with parameters in the format of \"#d#<>#\", where the first # is the ";
rMessage.text = rMessage.text .. "number of dice to be rolled, the second number is the number of dice sides, and the number following the ";
rMessage.text = rMessage.text .. "x being the number to be rolled against - being either '<' for lower or '>' for higher.\n";
rMessage.text = rMessage.text .. "If no parameters are supplied, the default parameters of \"1d100<55\" are used.";
Comm.deliverChatMessage(rMessage);
end

Hi Damned, great work again!

A question: is it possible to use the spell flip panel WITHOUT use the normal spell frame under the attack frame?
I modified MoreCore as you can see in the attached image, and i don't use the normal spells frame.
Second question: the freely resizable sheet dimensions has done thanks to new CORErpg function or is it embedded in MoreCore?

MoreCore character sheet: Attachment 23218

Quote:

---

Originally Posted by graziano.girelli

Second question: the freely resizable sheet dimensions has done thanks to new CORErpg function or is it embedded in MoreCore?

---

It's a mixture - the MoreCore tab resizing is embedded in MoreCore as that isn't in CoreRPG. The other tabs are CoreRPG tabs. They always had the code to do that, it's just that the base character sheet specification didn't allow resizing (it had a set width and height). Damned and I had the whole character sheet resizing (width and height) for v1.43 - so even if CoreRPG didn't allow it in FG v3.3.5, it would have been there in MoreCore. I hope that answers your question?

Hi graziano.girelli

it should be possible to adjust your extension to still use the flip frame and not show the other Spell option.
You will need to replace a few of the window.spellsframe.setVisible(false); type commands.

It is a chunk of extra code probably for your extension though...

The charsheet width is mostly CoreRPG and Trenloe did a chunk of additional work on the MoreCore tab to facilitate that.

Edit: Ninja'd by Trenloe.

Quote:

---

Originally Posted by damned

Hi Pepor sorry - no. /explode was a 100% rewrite. Massive change in code. Close your FG down - open the db.xml in Notepad++ and doa find/replace on edies with explode and you can use the new roller.

---

Hi damned,

I have modified your manager_custom_explode.lua because I wanted, for instance, something like: /explode 1d10+5 15, where that 15 is the dificulty to beat. Now you get a message if you rolled over that dificulty number. I think I made it work but I hope you could take a look a it. Here I attach my own version. Thank you in advance.

Hi Pepor,

How do you determine what that number (15) will be?
Is it always a specific number?

The best thing to do always is to make it a new roll so that you still have the current roll, it doesnt get overwritten by updates and it can be added back in to MoreCore if it is used in other systems.
https://www.diehard-gaming.com/mchelp.html#newrolls

At a cursory glance it looks ok. What did your testing show?

Hi damned,

The number (15, 10, 13,...) is determined by the DM, it is a dificulty number for a given task, ability check, attack and so on. I am still working, really slowly, on the Cyberpunk2020 sort of ruleset/charactersheet, where you roll a d10 dice, it can explode, and you can add or substract modifiers, and you have to beat a dificulty given by the DM.

As you said, I was also thinking of making a new roll.

Thanks!

problem with a moving target number is you have to edit the string each time...
how many other modifiers come into play?

Quote:

---

Originally Posted by Trenloe

It's a mixture - the MoreCore tab resizing is embedded in MoreCore as that isn't in CoreRPG. The other tabs are CoreRPG tabs. They always had the code to do that, it's just that the base character sheet specification didn't allow resizing (it had a set width and height). Damned and I had the whole character sheet resizing (width and height) for v1.43 - so even if CoreRPG didn't allow it in FG v3.3.5, it would have been there in MoreCore. I hope that answers your question?

---

Absolutely, thanks!