PDA

View Full Version : Testing...


Mista Tred
July 2nd, 2007, 20:49
Need someone to test to see if anyone can connect to me or not.
Either post here or AIM me at [email protected]
warm seal dead vest
Hamish
July 2nd, 2007, 21:26
No luck here.....
Oberoten
July 2nd, 2007, 21:28
No luck I am afraid.
www.pcflank.com

Try here, check port 1802 ... or was it 1208?
Griogre
July 2nd, 2007, 21:28
None here either.
Mista Tred
July 3rd, 2007, 04:35
thanks for the feed back, still trying to figure this issue out
Felix_Domestica
July 3rd, 2007, 05:45
Me couldn't connect to you too. If you find a solution can you please post it? I am having the same problem. I can connect, but noone can connect to me. A friend of mine can connect to me trought the LAN, using my LAN IP.
Griogre
July 3rd, 2007, 06:19
That just probably means your firewall(s) aren't port forwarded or don't have the right port open. Use a port scanner to check - but I would not be surprised to hear that the scanner reports port 1802 is not open.

You might want to check the FAQ here: https://www.fantasygrounds.com/forums/faq.php?faq=networking#faq_networking_1
Felix_Domestica
July 3rd, 2007, 22:10
You were right. It wasn't open :D
The Velvet Souljah
July 3rd, 2007, 22:57
The other thread you should check is: https://www.fantasygrounds.com/forums/showthread.php?t=4279

This shows you how to (a) set your machine up with a static IP address and (b) configure port-forwarding services so that your router can pass requests back and forth to a machine on the LAN side of your network (and thus not visible to the outside world).

You might not have the same equipment, but this should give you enough of a headstart to get you where you need to go. If you continue to have problems, perhaps you can start by giving us a better idea of what is included in your setup.

Hope that helps.
Felix_Domestica
July 4th, 2007, 13:56
It works now, I opened it and now it works. Thanks for help. :)