View Full Version : TopSecret SI

December 5th, 2020, 03:37
Updated it for the changes made FGU. Im only testing in FGU now but I left most of the stuff necessary for FG.

Extension has the charactersheet and the dice, mod has the rolls and a pregen.

December 5th, 2020, 05:30
Please can you provide more info - please detail exactly which rolls you are referring to and please provide as much detail as possible on how the mechanic works

December 5th, 2020, 06:43
Attribute check - you have to roll under your attribute. The game admin determines by what the challenge is if its going to be a full, half, or quarter. Modifiers are applied after to the number you need to roll under so they are 'not' halfed or quartered. "/tsprimary 1d100x(p1)" works fine for that but I have to create 3 entries with p1 being full on one, half on one, and quarter on another. +/- modifiers work appropriately too.

Skill check - again you roll under and the check is done against an specific attribute, again at full, half, or quarter, with modifiers applied after. A skill can be leveled up so you can gain a bonus for higher skills. "/tstertiary 1d100<(a)+(p3) has been working perfectly for that" but again I have to create 3 entries and bind "a" to the full, half, quarter stat. I've been putting the skill level bonus in p3 and my list of +/- modifiers works fine.

Image might help

December 5th, 2020, 13:01
What if I were to code a check for Ctrl or Alt keys being pressed?
If Ctrl was being pressed then it would roll against half and if Alt was pressed it would roll against quarter?

Can you confirm the math?
Exactly what number should be halved/quartered?

December 5th, 2020, 18:10
That would work.

Quarter and half checks are always rounded up. So if a stat is 33, half is 33/2=16.5 round up to 17, quarter is 33/4=8.25 round up to 9.
You could also just do half of the half if its easier on the tooling then trying to round up .25. 17/2 = 8.5 round up to 9

In the case of "/tsprimary 1d100x(p1)", "p1" is going to get halfed and quartered.
In the case of "/tstertiary 1d100<(a)+(p3)", "a" is what gets halfed and quartered.

Also, one small tremendously helpful favor if I could ask. If your going to be doing a new roll like tstertiary, can you put the sum value in p3 instead of p2? It lines up on the character sheet so much better because i can do "Level Modifier Stat" with my boxes


December 6th, 2020, 02:14
hmmm changing the values means i have to redo my modules/charsheets and my time is limited...
if i change the roll will you update my modules/charsheets for me and save me some effort...?

December 6th, 2020, 03:18
Absolutely, I can handle that. Im still learning how FG scripts / codes things but im getting the hang of it.

Im kind of a newbie to the code. I was assuming it would be changed in scripts/parameter_manager.lua where p2 is declared.

Am I in the wrong place? Thats basically what I did as a temporary measure, just added a version of parameter_manager.lua to my extention.

December 6th, 2020, 04:46
Im not 100% sure what you are trying to do but the correct way to fix this is to change the rolls to use p3 instead of p2 and vice versa... i think...
and that would be done in the specific rolls this pertains to rather than changing it in MoreCore and affecting every other game out there

December 6th, 2020, 06:02
No I wouldn't expect to change anything to the base set of code, that would just mess everyone else up.

I probably just mis-understood what you where asking me to do. Im not very fluent on FG coding or the morecore ruleset, yet. I don't know what you meant by modules/charsheets. Im looking at the rulesets\MoreCore.pak and I can't find the reference.

I thought we where talking about the request to change the sum value from p2 to p3. I was only asking for that 'if' you planned to write a new roll. I figured it would only be feesible if it was a brand new roll otherwise it would mess up whatever anyone else was doing. I thought writing a new roll is just a matter of copying the existing files and tweaking new version of them but now I see its alot more than that.

No worries.

December 12th, 2020, 06:29
Not alot of free time but made some progress. Got stuck on making a larger Portrait but found some old threads with clues. Working a bit more this weekend on it. Lost track where some of the page configuration is in morecore and some is still in core. Figuring that out.


December 12th, 2020, 09:37
looking great Pharo!

December 27th, 2020, 23:45
90% done with the character sheet. Yes I like large portraits. Found a thread where Trenloe, LordEntrails, and Moon Wizard had forged the path. Wasn't too bad once I figured out what they where talking about. I'm typing in all the rolls now and I think I might add one more tab for "Cover Identites" but for the most part its done.

The last thing I'll need is the roll that works with the CTL and ALT. IF there are any examples you could point me to where this is already done ill take a shot at it.


December 28th, 2020, 06:33
Please try replacing this script and testing.
Rename the file .lua and overwrite the existing file

If that works I need to know which parameter I do it to for the tstertiary roll.

January 3rd, 2021, 18:48
Sorry for the delay, holidays and all.

Integrated the script, works perfectly!

I made one small change to eliminate ambiguity on the roll. All it does is add a HALF and QUARTER in front of the skill check. Let me know if its acceptible.

Probably should of did those in lower case. Looks like all caps causes the line to feed.

January 3rd, 2021, 23:42
Thanks Ill add those back into the base.

January 7th, 2021, 06:45
Still working on creating a mod that has atleast the rolls from the Players Guide and a example characters. I've done Combat, Mechanical, and Close-Combat skills. Need to do General, Specialty, and Education.

One of the players asked if it was possible for the combat rolls to identify the hit location since thats part of the game so I integrated this roll in. Its just tstertiary with something to look at the 1's place to determine hit location.

For your review "if" you want to integrate.

January 7th, 2021, 07:44
Sounds good Pharo - thanks.

January 8th, 2021, 06:02
Ok I just spent like an hour reading the forums and appearently this is partly an old issue but I'm hoping you have some insight.

In TopSecret SI, the percentage rolls are from 00-99. 100 isn't actually an accepted roll. The way that percentages are rolling, its doing the 1-10 sided die and adding 10 if you roll 10.

Is there a different way to do 00-99 instead of 1-100?

January 8th, 2021, 06:07
Yes. Use Unity. I think in Unity the d100 uses the more common 1-100 dice.

January 8th, 2021, 06:10
Oh good. Im stuck on the legacy version but the GM for this game has Unity. Ill try testing in the demo unity tool.

January 10th, 2021, 00:11
It looks like theres a couple of formatting issues with Unity and Morecore. Is there a newer version of Morecore thats designed for Unity?

Its not a huge deal but the boxes that hold stats are too narrow now to handle more then just 1 number. Obviously it looks like the font changed so maybe thats the cause.


January 10th, 2021, 01:14
in your extension adjust the fields that are found (example) in record_char_more.xml

<basicnumberred name="p3">
<anchored to="paramanchor" position="left" width="9">

try width="13"

January 10th, 2021, 02:28
I tried that and it didn't work but I just realized my mistake.

I've re-defined p3 in multiple times in other tabs. Newb mistake. Looks better now.

January 10th, 2021, 02:33
So you need to do p1, p2, p3 - above was an example.

January 12th, 2021, 05:36
Is it possible to precreate a set of .clilist1 defaults that are used when the characters are first created? In my case, im trying to set it up so the attributes fields always list in the same order initially to make it easier to drag and drop the rolls in. I can create a pregen character as a template but I was hoping I could just list a set of default entries for the datasource.

January 12th, 2021, 05:40
Exporting a character sheet with everything setup as a base character is the simplest way.
To auto fill the skills have a look at the Trail of Cthulhu or Low Fantasy Gaming extensions.

January 18th, 2021, 19:24
Status update- spending way to much time but learning alot

I have all the base rolls written up. I put them in Library Module but I'm thinking of just leaving them integrated into the extention since the are part of the base system. Trying to make sure I don't break any copyright rules but the game systems over 20 years old, not even sure anyone has copyright any more.

I started integrating some of the graphics from a TopSecret SI mod another player made some years ago, he never finished it. He had a good foundation though and alot of the graphics tweak easy enough once I get them in GIMP.

Unity fonts threw me for a minute. Is there a reason to even bother with fgf vs ttf/otf? I get that Classic loads fgf as priority but doesnt it also load ttf? So why not just use ttf across the board. Half tempted to create my own font based on the TopSecret SI logo.

Oh, is there any way to stop it from alphabet sorting the clilist? Just let it be by the order that they are added to the list.

Might need to draw a line somewhere. I keep coming up with other things I want to change.


January 18th, 2021, 23:58
Looking great Pharo!
Hopefully you will be able to share your great work.

You can disable sort. Search the forums for disable sort and you should find some examples.

January 25th, 2021, 03:42
Trying to rough one last thing out. Weapons. I'd like to do an actual "item" but thats probably a longer term plan.

In the short term, is there a template I could use to drag and drop cli_rolls like list_text but only one roll? I figured I could just manually create some lines for the weapons and just let the players drag and drop a single roll onto the attack, dmg and ammo fields.

January 25th, 2021, 04:07
Im sorry Im not following the second half.

For the first part you would look at 5E and see the code that creates an Action on adding a Weapon to Equipment.
Its not something on my list of things to do at this time.

January 25th, 2021, 04:10
Im trying to create a single field that will take one drag and drop of a single roll. Just like how you do all the rolls under <list_text/> but instead of it being a list, its one single item.

<string name="Weapon1">
<anchored to="weapons" position="insidetopleft" offset="30,40" width="100" />

January 25th, 2021, 06:25
Look at Race and Class

January 29th, 2021, 06:51
I think i figured it out. I tweaked a version of the cli_rolls class and just added all the weapon stats plus a roll bound to dbdamage. Works good in testing. Its kind of important to do it this way because the attribute links to the weapon skills and that links to the weapon. Each one with its own modifiers being added along the way. Worried it might be too complex without instruction.

Im going to start cleaning things up and try to get a initial copy out there. Hoping to get some feedback.


Quick question - is there a way to get the dbdamage to pick up the weapon name?

<stringfield name="weapondmg" >
<anchored to="weaponrng" position="left" offset="20" width="40" />
<tabtarget prev="weaponname" next="weaponrng"/>
<frame name="fielddark" offset="7,8,7,8" />
<hover name="rowshade" offset="7,8,7,8" />
function onDoubleClick(x,y)
local dicerolltmp = tostring(window.weapondmg.getValue());
CustomDiceManager.processRoll("dbdamage", dicerolltmp)

January 30th, 2021, 21:52
Answered my own question .. given enough persistence ..

function onDoubleClick(x,y)
local sParams = tostring(window.weapondmg.getValue());
local rSource = tostring(window.name.getValue());
local rActor = ActorManager.getActor("pc", window.getDatabaseNode().getParent().getParent());
sParams = sParams .." "..rSource;
CustomDiceManager.performAction("dbdamage", nil, rActor, sParams)


January 31st, 2021, 01:40
Sorry Pharo I missed that there was a Q in there. Well done!

January 31st, 2021, 07:23
Still so much I want to fix but running out of free time.

Any feedback would be welcome.

November 5th, 2021, 03:53
Thank you so much for the great work you have done. It is bringing back great memories. I was just wondering is it possible to drag and drop advantages and disadvantages on to the character sheet?

November 5th, 2021, 17:09
Absolutely, I created 2 "add-ons" that have all the Adv/Disads as abilities and the skills as rolls. You just right click in that field and create item.


November 5th, 2021, 21:21
Thanks again. Excellent work.
Are the Abilities supposed to be there already or do I have to enter them?

May 26th, 2022, 03:17
My english is not great but i think i understand you made a ruleset for Top Secret S.I. Am i right? Can you share it please?

May 27th, 2022, 02:58
Thanks again. Excellent work.
Are the Abilities supposed to be there already or do I have to enter them?

I created two modules with all the skills and abilities but I copied the descriptions in from the books. I'm not sure if that would violate any copyrights.

May 27th, 2022, 02:58
My english is not great but i think i understand you made a ruleset for Top Secret S.I. Am i right? Can you share it please?

Mods available for download at the top of this thread.

May 27th, 2022, 16:24
Thank you

I tried it but it didn't work with the Top Secret S.I. ruleset i have.

Is it made for Unity? I asked because some windows opened when i clicked at some places.

Could you check the ruleset to see if you could fix it in some way please?

I don't know how i can give it to you

I already have the books in PDF

May 27th, 2022, 16:29
I forgot to say i didn't find the 2 modules you talked about the rules

"I created two modules with all the skills and abilities but I copied the descriptions in from the books"

May 28th, 2022, 03:57
Thank you

I tried it but it didn't work with the Top Secret S.I. ruleset i have.

Is it made for Unity? I asked because some windows opened when i clicked at some places.

Could you check the ruleset to see if you could fix it in some way please?

I don't know how i can give it to you

I already have the books in PDF

This extension is meant to run on top of the MoreCore ruleset. Youll have to add that via the forge and then activate this extension.

May 28th, 2022, 04:06
Ok, I'll check for this.

And about the rule set of Top Secret, can you look to fix the little problem please?

May 29th, 2022, 12:54
Ok, I'll check for this.

And about the rule set of Top Secret, can you look to fix the little problem please?

You load the TopSecret extension inside a MoreCore campaign.

June 1st, 2022, 02:25
I know. I was talking bout the one i told you i already downloaded a couple of years ago here.

July 19th, 2022, 05:15

I was trying the Top Secret Ext and Module, and when I roll damage from the weapon, I get an error. The following is also posted to the chat: "UtilityManager.isClientFGU - DEPRECATED - 2022-07-12. I would be happy to help with this ext and module.

Thank you for all the hard work.

July 19th, 2022, 16:06
Make sure your MoreCore is up to date firstly - jus run the FGU updater.
If it still persists and Pharo doesnt chime in ill have a look.

July 20th, 2022, 07:21

Thank you. I will check all my stuff. I usually update before I use FGU, but possible I didn't this time.

July 20th, 2022, 07:54

I updated everything and still got an error when double clicking the DMG string 1d6+1 on the 9mm FN Browning. The error was Script execution error; [string "weapondmg"];5: attempt to call field 'getActor' (a nil value)

Let me know what I can do to help or what I may be doing wrong with the module. Love MoreCore. Great work.

July 20th, 2022, 11:52
Try this version until Pharo has time to review.

July 21st, 2022, 05:53

Thank you. It is working. I appreciate the support.

July 25th, 2022, 00:21
I havent looked the code in awhile. Was getting a bunch of warnings but those fixed with updates.

I'm sure Damned fixed it. :D

July 25th, 2022, 00:39
Damned, are they expecting us to replace all the getActor's in the extensions?


July 25th, 2022, 01:36
Yes. Replace with resolveActor and you also remove the first paramater.

July 26th, 2022, 02:56
Damned is this going to break the modules ability to work on FGC vs FGU?

Nevermind, I went ahead and searched through everything replacing the getActor with resolveActor and killing the first parameter.

Posting the upgraded version at the top of the thread.

July 26th, 2022, 07:12
MoreCore no longer supports FGC.