View Full Version : Combat in the FG MnM system - which rolls are manual, which automatic?
MattShepherd
May 2nd, 2020, 00:02
Hi all,
A question about the system in general -- I'm working on FGU with the new build on the test server, but also getting to know the mechanics of FG and MnM in general. So I'm not sure what the anticipated behaviour should be, and whether I'm looking at a bug, or just don't understand how the back and forth of dice and rolling work.
In the combat tracker, I can have Avian Warrior target Bystander, then I drag Obsidian Hatchet +7 (Close Damage 5) to the chat box. I get:
[ATTACK] Obsidian Hatchet +7 (Close Damage 5)
D20 +7 (17+7 = 24)
Attack [24]-> [at Bystander] [2 Successes] [DC] 10
First, I'm not sure how 24 over DC 10 is 2 successes -- it should be 4, no?
Second, what should happen next?
Should the Bystander roll Toughness (D20 + 0) manually vs. DC 20 (Hatchet Damage 5 + 15 for a damage roll)?
Or should the system roll that check automatically?
superteddy57
May 2nd, 2020, 06:22
The Test version will not force a toughness roll on a hit. This will take the dice out of the player/DM's hand. The ruleset wont automate the complete combat experience for that reason. So the player/DM will have to roll and track their bruises (toughness penalties to check) and health.
As for the 2 successes, The rulebook stated a degree of success/failure for every 5 (rounded down) from the DC. If this is incorrect, then it can be changed.
MattShepherd
May 2nd, 2020, 13:25
Thanks -- I think I need some help learning how successes / failures work; on p. 14 of the DHH it looks like DC +10 should be three successes, and then at DC +15 four successes. So Attack 24 over DC 10 should be +14, and three successes -- or am I wrong?
superteddy57
May 2nd, 2020, 21:57
You know, I might have not added in the beginning success/failure into the equation. So yeah you received 3 successes plus the original success. I can try and sort that out. Good call.
Solstar
May 5th, 2020, 06:18
You know, I might have not added in the beginning success/failure into the equation. So yeah you received 3 successes plus the original success. I can try and sort that out. Good call.
Hey guys, here to chime in. So, in the above example, 10 through 14 is one degree. 15-19 is two, 20-24 is three degrees.
Normally, degrees of success on attack rolls are not needed. With Multiattack being the most common exception. Normally just meeting your DC is enough, but it's good to have the functionality in, just in case.
As for the Toughness roll in response, it absolutely needs to be manual. One reason being the one superteddy mentioned, that it keeps the players engaged. But, also, M&M has soon many exceptions to its formula, that it's impossible to account for all the possible variables in a static system.
Finally, your math on the Toughness Resistance roll is correct.
:)
Solstar
May 5th, 2020, 06:32
I wanted to reply directly Matt, so you got a notification. Three successes in that example is correct.
MattShepherd
May 5th, 2020, 23:55
Gotcha -- 25 would have been the four-success threshold?
I'm still getting the hang of it. For attacks, then, it's kind of binary success/fail, and the true roll is the damage resistance (Toughness) on the defender's end?
Solstar
May 6th, 2020, 00:20
Gotcha -- 25 would have been the four-success threshold?
I'm still getting the hang of it. For attacks, then, it's kind of binary success/fail, and the true roll is the damage resistance (Toughness) on the defender's end?
Yes to 25 being the 4 degree threshold in that example.
As for attack rolls being most binary, in most cases, yes. The Resistance Rolls (of which Toughness is one) are the ones that require knowing degrees of success every time.
superteddy57
May 6th, 2020, 00:20
Correct, I added the degree of success to attacks, for expansion in case of any house rules that I saw floating out there. I try to code for every eventuality. Sorry for the confusion.
Solstar
May 6th, 2020, 00:37
I am really hoping for some intrepid hero to update the Conditions system so the conditions that affect defenses are automatically factored into resistance roll.
10 out of 16 of the Basic Conditions directly and predictably impact stats on the Character Sheet, like defenses, perception checks, or movement speeds. So they should be relatively straight forward to implement.
Combined Conditions are a little more tricky, but they are just multiple Basic Conditions. Technically, rules as written say you only recover from Basic Conditions, so programming the Combined ones to let you pick which Basic component to recover from and leaving behind the rest would be super nice, but I shouldn't hold my breath. :)
Saeval
May 6th, 2020, 19:46
When rolling a toughness check I'm a little confused. An unmodified toughness roll goes against a damage dc of 15 in the chat, but if I add a modifier to it then it changes the modifier to the toughness roll AND the damage DC. So do we ignore the degrees of success or failure in the chat and figure it out ourselves or will there be a way to add what the toughness dc is or have modifiers not affect that the dc. I did a basic roll (+1 toughness), a +2 modified roll, and a +5 modified roll just to show what I mean in the picture.
34959
I was trying to add the damage rank of a power as a negative modifier to the toughness roll to even out the DC 15 automatic adjustment but then it added to both the toughness roll and the DC
Solstar
May 6th, 2020, 21:01
When rolling a toughness check I'm a little confused. An unmodified toughness roll goes against a damage dc of 15 in the chat, but if I add a modifier to it then it changes the modifier to the toughness roll AND the damage DC. So do we ignore the degrees of success or failure in the chat and figure it out ourselves or will there be a way to add what the toughness dc is or have modifiers not affect that the dc. I did a basic roll (+1 toughness), a +2 modified roll, and a +5 modified roll just to show what I mean in the picture.
34959
I was trying to add the damage rank of a power as a negative modifier to the toughness roll to even out the DC 15 automatic adjustment but then it added to both the toughness roll and the DC
That looks like a bug. If you're only entering a modifier once, having it apply twice is clearly not right.
Were you using the modifier box in the bottom left of the UI just before making the Toughness Roll?
Saeval
May 6th, 2020, 21:08
Yes. I was hoping that the damage dc for toughness would stay a static 15 and I could tell my players to just subtract the damage modifier from toughness checks to get the degree of success or failure. But then it added modifiers to the dc as well as the toughness roll itself. The first roll was with the NPC static +1 toughness, the second one was with a +2 in the modifier box and the third one was with a +5 in the modifier box.
Solstar
May 6th, 2020, 21:31
Automating to-hit rolls only needs to check against the targets defense, which is defined in the attackers end and can be quickly cross referenced because everyone has the same defense types (dodge, parry, toughness, etc. )
It's a lot harder to automate resistance rolls because there are an infinite number of sources that the system needs to add 15 to get the DC.
I wish I was a programmer so I could figure out the best approach for the system.
Saeval
May 6th, 2020, 21:42
I’m ok with manually doing toughness checks. I wish there was an option to put in the damage rank (or power rank for a save) before rolling or just adding it as a negative modifier to the toughness or save check so it still comes out to the same math when going against a dc15 (or 10 save) check
Solstar
May 6th, 2020, 22:45
I’m ok with manually doing toughness checks. I wish there was an option to put in the damage rank (or power rank for a save) before rolling or just adding it as a negative modifier to the toughness or save check so it still comes out to the same math when going against a dc15 (or 10 save) check
Manually entering the roll seems like the only option. It's not enough to "Target" your Attacker and roll Toughness.
If there was a way for an attack to apply a notification requiring a Saving Throw in response (using D&D/Pathfinder terms), that would be awesome.
"Roll [Toughness] to Resist Against [Power Lord's Damage 12 Cosmic Blast]"
superteddy57
May 7th, 2020, 00:30
I'll look into it and see why the DC is pulling in the modifier instead of the roll.
DeviousHeart
June 19th, 2020, 04:47
If automatic could be made rollers choice on the fly, that would be cool. :)
But this probably comes too late. :)
superteddy57
June 19th, 2020, 04:51
Please check out the stickied thread at the top of this forum. It has the most up to date information related to the test version. The original combat system is in place and the same automation from the Live version is there.
DeviousHeart
June 19th, 2020, 04:54
Cool. All the drag and drop powers and everything?
superteddy57
June 19th, 2020, 08:04
Correct
DeviousHeart
June 19th, 2020, 12:37
Woot! :)
Powered by vBulletin® Version 4.2.1 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.