PDA

View Full Version : Another port forwarding thread - I'm sorry


MacNobody
June 28th, 2019, 04:24
I have a Ubee DDW365 modem. DHCP is enabled and I have a valid IP address, I am plugged in via copper to switchport on the modem.

I have UPnP enabled.
I have port forwarding configured and the rule is enabled.

I don't know what else to do to allow traffic on port 1802 to my PC

Local External
IP Address Start Port End Port IP Address Start Port End Port Prot Description Enabled
192.168.0.12 1802 1802 70.178.xxx.xxx 1802 1802 TCP Fantasy Ground Yes
LordEntrails
June 28th, 2019, 04:31
Welcome to the forums, no need to apoligize :)

There are a series of suggestions and things detailed in this post https://www.fantasygrounds.com/forums/showthread.php?47051-Fantasy-Grounds-Connections-Explained

If you go through that and still have trouble, please answer the 7 questions at the end and post your answers here.
Andraax
June 28th, 2019, 05:33
I have UPnP enabled.
I have port forwarding configured and the rule is enabled.

These are mutually exclusive; you should use one or the other.

And try leaving your "external IP" blank if it will let you.
MacNobody
June 28th, 2019, 13:45
These are mutually exclusive; you should use one or the other.

And try leaving your "external IP" blank if it will let you.

I unchecked UPnP and left the external IP blank and was successful. Thanks for the help!