PDA

View Full Version : NPC Creation for Traps?



kenneth_burnell
January 6th, 2014, 03:35
I have just started looking at the trap section in the npc tab for 3.5 ruleset. I am not quite sure of how I am suppose to fill the sections out. Here is the trap that I am putting in the room. Using the DMG setup of traps.

Water-Filled Room:
CR 3
mechanical
location trigger
automatic reset
multiple targets (all targets in a 20-ft by 20-ft room)
never miss
onset delay (10 rounds)
liquid
Search DC 13
Disable Device DC 20

So how would I put this in the npc tab under the trap section. Thank you for your help

Moon Wizard
January 6th, 2014, 03:57
The trap record was built using the pathfinder trap/haunt fields; since PFRPG has a fairly standard format for these while 3.5E was a little more free form.

It's mostly informational data storage, so feel free to place data where it makes sense to you.

Cheers,
JPG

kenneth_burnell
January 8th, 2014, 02:46
Alright thanks for the help.